HOP-245K Embedded Thermal Receipt Printer

Product Features:

●Simple operation,convenient maintenance.

●High speed, low noise printing;

●Long life printer head, reliable performance.

●Support automatic paper feed function;

●Support GB18030-2000 traditional Chinese font;

●Support paper near end detection.

●Support automatic paper cutting control;

●Support real-time state detection;

Application areas:

Bank wall hanger equipment terminal printer, self-service filling machine, self-help telephone, recharger, payment machine, self-help parking factory card machine, coupon printer, queuing machine printer, visitor machine, self-help printing machine, self-service terminal printer, storage cabinet printer, storage cabinet printer, storage cabinet printer field etc

Technical parameters:

Printing method: direct line heat sensitive printing

Print density: 384 point / line (default)

Resolution: 203DPI

Paper feeding way: unidirectional friction feeding

Print width: 8 /mm, 48mm (valid),

Print character line: Western (12*24): 32 characters / lines; Chinese character (24*24): 16 characters / lines.

Character spacing: 30 points (3.75mm) Note: character spacing can be adjusted by control command, increment to 0.125mm..

Print speed: Max.100mm/ seconds. The speed of printing depends on the speed of transmission of data or control commands.

Paper speed: about 100mm/ seconds. Minimum unit for paper feeding: 0.125mm.

Printing format: the largest 32 columns (12 x 24 characters), the largest 16 columns (24 x 24 Chinese characters).

Character set: IBM character set II and GB 18030 all Chinese character set.

Internal buffer: 4K bytes (bytes).

Automatic paper cutter: fully cut or half cut.

Paper near end detection: detect the diameter of when the paper roll is 16 to 42mm (calculated according to the center of the paper roll).

Print interface: serial interface, RS-232C compatibility, support for RTS/CTS handshake protocol, asynchronous communication 115200 (default), optional 9600/19200/38400/57600/115200.

Printing paper: high quality thermal paper, paper thickness 65-100 microns, roll outer diameter 80mm (maximum), roll inner diameter 25.5+/-0.5mm (minimum).

The width of the paper is 57.5+/-0.5mm.

Print command: EPSON ESC/POS command set compatibility.